Why Do My Earbuds Keep Breaking? Causes + Solution

Post Disclaimer

We independently review everything we recommend. The information is provided by Why Do My Earbuds Keep Breaking? Causes + Solution and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

How much time do earphones last? Why Do My Earbuds Keep Breaking? Well, absolutely not always. Each pair of headphones breaks. It is a fragile device with many complicated components, and these components will become stirred and wear out over time and lead to unavoidable problems.

It sounds somewhat dreadful, and now you are probably asking How Long Should Headphones Last? No exact expiration date or breaking point is more accurate. We’ll only suggest you’re doing anything wrong if your headphones always break within a year.

You can use earbuds for up to three years, and you can double or even triple the projected lifespan of any set of headphones if you are well cared for. Why constantly break your earbuds and headphones? Here are a number of common errors that kill your headphones before they are due.

Why Do My Earbuds Keep Breaking?

The following elements are the most frequent causes of earphones breaking so easily: When removing the earbuds, pulling or straining on the cables leaving headphones dangling from furniture such as beds, couches, and tables twisting your earbuds while you sleep with them in.

My Earbuds Keep Breaking

Why Are Your Earbuds And Your Headphones Broken?

Why constantly break Your Earbuds And Headphones? Here are a number of common errors that kill your headphones before they are due.

Price Tag Skimping

Why do inexpensive headphones break? Because they were cheap! Paying more does not ensure a better product, and lesser things can be manufactured and built to last, but you get what you are paying for. You can make cheap headphones endure for years, but don’t be surprised if your $20 knock-off earbuds break after three months of use. Robust materials, intelligent designs, and quality control come at a price. You have to sacrifice something to pay less.

The Volume Increases

Another reason for breaking up headphones is that they are often used at a very high volume. This is done by creating sound waves in all noise-generating equipment. Sound waves cause vibrations, and the higher the sound, the more vibrations are produced. As headphones are fragile components, high volume might twist the sound-producing components.

You’ll stop listening to particular frequencies at first. The audio is changing and degrading, losing its full capacity. As it gets worse, sounds can begin to feel tinnier than normal. You will hear buzzing and other unpleasant objects over time.

Sleep With Them

When you’re sleeping, you can’t control how you move. You’re rolling, flopping, turning, and turning. There’s a fair possibility you’re going to grab the chord at least. You may also cause headphones damage by sleeping on them with a heavy head.

Skip your headphones and listen to anything you listen to with an Amazon Echo, on and off with your voice. If this is not an option and you need to sleep with your headphones, consider taking a couple of wireless earbuds.

Sweat And Moisture Exposure

Water and electronics don’t go together. Just as your Smartphone or tablet can be fried, water can be dried by the audio drivers on your headphones.

Sweat can be an enormous concern, particularly when you listen to music while you practice. A headband may lessen the chance of sweat, but sports or activity headphones intended to sweat are more suited. The audio quality may not be top quality, but it will at least last.

If you are in the rain or right out of the shower, avoid using headphones. Water can run down to cracks and wet hair. High humidity can also accelerate the long-term degradation of interior components. But look at these headphones and earbuds for swimming if you absolutely need a pair of drivers which can stand dampness.

Cord Pulling, Not Plugging

Another important reason your headset continues to break is tugging on the cord produces stress when the cord reaches the plug. Over time, pulling might break down the inner wire and detach the plug from it. Or worse, the cable might be pulled off the connector by pulling, leaving it stuck in the audio port of your device.

This also applies to earbuds. Do you tug on the string when you’re done to pop the buds out of your ears? Due to unfair pressures, one of the inner wires is broken before the other, leaving you with earphones that play only audio on one side.

The victim is for many of us the left earbud. Why, but here’s a fair guess, is unclear. Most of us are correct, thus it’s only logical that we go to the other earbud on the left whenever we want to throw it away. If you’ve ever wondered, why does the left earbud always break? You now know why.

Don’t pull the cord! The major reason your headphones break is tension. You can force yourself out of this behavior by switching to a cord with an L-shaped jacket that cannot be disconnected by cord-tugging.

A Journey Without A Case

Stop throwing your headphones and earphones into pockets, bags or bags. No matter how careful you are, the contents of the container are jostle, pulling, stretching, twisting, bending, pinching, crushing, and damaging. And if, for example, you leave the cord plugged into your phone, large items may crash into and harm the connecting point. You can use an L-shaped jack to avoid this.

Use a case whenever possible. Most high-end headphones nowadays have hard storage cases, so that’s a little less worrying. Earbuds can be maintained in portable cases. You may also keep this in a protective case for earbuds when your headphones have a detachable wire. Worst scenario, it’s better than nothing to have a soft pouch.

Winding The Cord In The Nodes

Have you seen the “funny” ways to coil cords that don’t tangle them?? Well, ignore them! Ignore them! If you’ve ever wondered why your earbuds keep breaking, it’s because of the internal wires’ accelerated wear from tight loops and knots.

If in doubt, here are the thumb rules: Never tie knots. Never tie. Avoid narrow loops. If you need a rescue for your earphones, wrap the cable with notches for the plug and buds around a paper roll. Use the “roadie wrap” method illustrated in the video below for normal headphones. You may then pull together two ends of the cycle to form a figure 8 and secure it with a rubber band or twist knot.

They Are On Your Head To Forget

Even our greatest part is that we spend hours playing games or watching a match on your portfolio, then we have to run into the toilet and forget to take the headphone off first. Snap, snap, facepalm, snap. Cutting such a line exerts a lot of abrupt tension on the inner wires and on their connection points. The first, second or even third time, the headphones may not be breaking, but the damage is cumulative. Each cord snap is a snap nearer to a defect.

Dangling The Cord

This is another technique to destroy long-wheel headphones: to allow the wire to slide off the edge of a desk, either during rest or in use. Even with the greatest wired headphones, this is a concern. A hanging rope is basically bent at a 90° angle and at this point the internal wire is stressed unfairly. Think of it like a base pin: flex back and forth, it’s going to shatter. If you mistakenly press or pinch the chord against the edge, the inner wire could be cut down and your headphones could be ruined.

Rolling Over The String

Headphone cord lengths can get fairly long. For example, both the Audio-Technica ATH-M50x and Sony MDRV6 are 10 feet long and even cheaper, but excellent quality headphones can be equipped with 5-8 feet long cords. You could be tempted to hang such a long cord on the ground. If so, take additional care not to jam—or worse, roll over your computer chair by the casters. It takes only one section to make the whole thing useless.

How Do You Know If You Break Your Earbuds?

But how can you tell whether or not your earbuds are already damaged? Here are several revealing signs:

  • Sound loss in either or both earbuds: If your earphones only play in one ear or not, check or test your settings on other devices. If it continues to malfunction, a cracked wire may be present along the cord or in the earphones.
  • Audio falling out time and time again: Is your audio skipping your favorite beats while listening? Will it drop out when you move the cables, for example as you walk or twist the cord? These are symptoms that your earphones have reached the end of their lives.
  • Audio crackling or scratching: You start hearing static sounds. These problems may point to blown speakers or damaged connections that prevent electronic signals.

Why Does The Left Earbud Always Break?

Do not pull the plug! The major cause of headphones breaking is tension. By switching to a cord with an L-shaped jack, which is hard to unplug by cord-tugging, you can break yourself from this behavior.

Why Do My Earbuds Keep Breaking On One Side?

The most common causes of earbud failure are disconnecting the headphones by pulling or tugging on the cables and having earbuds lying around furniture or on the floor. Leaving your headphones in your ears while you sleep can cause them to become twisted.


Let’s sum this up. Let’s sum this up Why Do My Earbuds Keep Breaking? Why do your earbuds continue to break on one side? Well, that’s a straightforward response. Your earbuds continue to Break On One Side because on that side you are continually hurting the earbuds.

This wouldn’t continue with every pair you buy if you were careful. The answer is: that you don’t care for the earbuds. Follow the procedures to ensure that your earbuds do not break. I hope you people did that. Let’s watch whether this pair is breaking again on the same side.

Frequently Asked Questions

How long are earbuds usually?

How long earbuds should last? The typical length of earphones is 3-6 months, depending on how often they are worn. The first sign is sound loss on one side when no apparent indicators of damage exist.

Is it wrong to keep plugged headphones overnight?

Yes, since lithium-ion batteries are used by headphones, they may be loaded overnight. Lithium-ion batteries include battery management technologies that cease charging immediately when the battery reaches 100 percent. The fact that your headphones are plugged in for a long period of time has no effect on your battery health.

Should you always put back your earbuds?

Nearly all wireless earbuds have lithium-ion batteries, which are designed to stop charging once charged. Keep your earphones out of harsh temperatures, dampness, or even dust if you keep them in the case.

Why break Apple earbuds so easily?

So what does that give? Why are the cords of Apple so stinking badly? According to Zac Hall, a 9to5Mac Mac specialist and writer, the instability of the lightning cords begins with their endpoints. In other words, the point where the cord enters into the component that you connect to a gadget is particularly likely to be bent or tugged.

Similar Posts