What Does E2 Means When I Turn My Bissell Digipro Robot Vacuum?
Post Disclaimer
We independently review everything we recommend. The information is provided by What Does E2 Means When I Turn My Bissell Digipro Robot Vacuum? and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more
In this article, we will try to answer the question What Does E2 Means When I Turn My Bissell Digipro Robot Vacuum? It is likely that you are seeing two codes on the vacuum. E, the first number, is the error code.
It is displayed when there is an error on the vacuum, or if it needs to be reset. The second digit, 2, is the part of the vacuum that’s malfunctioning. This is the code you might see when your robot vacuum has an error. This could be because of a number of reasons.
What Does E2 Means When I Turn My Bissell Digipro Robot Vacuum?
If your robot’s control panel displays “E2,” the top panel or dust bin is improperly mounted. Open the top tab by pressing down on the ridged tab until it releases to access the dust bin.

Possible Reason For Robot Vacuum Error
Some possible reasons for this error code are:
- The Battery Needs To Be Charged
- There’s A Blockage In One Of Your Brush Rollers Or Filters
- You Need To Replace Your Filter
- Damaged Charger Cord
- Damaged Charger Port
The Battery Needs To Be Charged
The E2 means the battery needs to be charged. The vacuum cleaner is designed to stop when the battery is low automatically. The e2 error is a common issue with the Bissell Digipro Robot Vacuum. If you notice this error code displayed on your robot vacuum, follow these steps:
- Check if the battery is low and needs to be charged. If it is and you’ve already plugged it in for charging, wait for a minimum of 3 hours before turning it on again to see if that solves the problem.
- If you’re not sure if your battery needs to be charged or not, take out the battery and inspect it for any damage – such as a dented casing or loose wires – as this could cause this issue as well.
- If your battery looks fine, plug it back in for charging again
There’s A Blockage In One Of Your Brush Rollers Or Filters
E2 is an error code that indicates that there is a blockage in one of the brush rollers or filters, which prevents the vacuum from operating properly. You can find your brush roller by looking for the two rotating brushes located at the bottom of the vacuum.
You can check to see if there is any debris or hair wrapped around the brushes by inserting a thin object like a pencil into them to clear any blockages. If you still have an E2 error code after clearing your brush rollers, you may need to take apart your vacuum and clean it thoroughly.
You Need To Replace Your Filter
The E2 error message on a Bissell vacuum cleaner usually indicates that the filter needs to be replaced.
The filter is typically located at the back of the vacuum cleaner, and you will need to remove it and replace it with a new one.
Damaged Charger Cord
The charge cord may have been damaged from being chewed by pets or from being run over by a vehicle.
Damaged Charger Port
The charger port where you plug in your charger cord may have been damaged from being chewed by pets or from being run over.
What Does E6 Mean On The Bissell Robot Vacuum?
Your control panel will show E6 if the battery is not inserted correctly, resulting in a charging fault. Turn your machine off by moving the power switch to the OFF (O) position before you begin.
What Does E1 Mean On Bissell Smart Clean?
Your robot’s control panel will display “E1” if one of its wheels is stuck. To resolve this, relocate the robot away from any obstructions that cause the issue and restart using the power switch on the robot’s side. There you go!
Conclusion
An E2 error is an error code that appears when there is a malfunction with the laser eye sensor. This sensor controls the vacuum’s ability to move and clean. If you see this error code, it means that the robot vacuum may not be able to navigate around your home or object as well as before.
The Bissell Digipro is a smart robotic vacuum that uses an app for remote control and monitoring of the device. The app also lets you schedule cleaning according to your preferences and needs. Now you know everything about What Does E2 Means When I Turn My Bissell Digipro Robot Vacuum?
Frequently Asked Questions
Does the battery need to be charged?
Yes, if you see E2, then it’s likely that your vacuum needs to be charged or that there is a problem with the charging system.
Does it mean I should call for help?
No, but you might want to call for help if you are seeing E2 because it’s likely that there is a more serious issue than just needing to change or clean your robot vacuum.
What does E2 mean when I turn on my Bissell Digipro Robot Vacuum?
E2 stands for “Error Code” and is a way for the vacuum to communicate its current status. If you turn your vacuum on and it displays “E2,” it means that there is a problem with the power supply.