Unable To Ping A Computer On Same Network (Cause + Fix)
We independently review everything we recommend. The information is provided by Unable To Ping A Computer On Same Network (Cause + Fix) and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more
This blog will help if you are Unable To Ping A Computer On Same Network! If you pay careful attention, you can hear the ping command in action. A ping network test sends data packets to a specific IP address to determine whether or not devices connected to an IP network are indeed connected.
By doing a ping test, you can find out the “latency” (i.e., the duration of the response time) in the case of confirmation. A decreased latency offers a better experience since, in circumstances like online gaming, where a prompt response is necessary, even milliseconds might matter. If the ping is unsuccessful, this may indicate the need for additional research to identify the underlying reason. How does pinging a network operate then?
Unable To Ping A Computer On Same Network
The connection status should be checked first if you are unable to ping another machine on the same LAN. Ensure that the subnet mask and network connection of the two machines are identical. The firewall settings on both machines are the second item you should examine.
Requests for ICMP are blocked by aggressive firewall settings. It will stop other machines’ ping queries and responses. You might try disabling the firewall on both PCs and pinging once again to verify this scenario.
Change the firewall settings if you can this time ping the second computer. Check the ICMP reply to your ping if none of this is successful. There must be some hints in there. In some instances, the error message will provide additional information such as a transmit failed error or general failure type.
What Is Ping Exactly?
A Windows, Mac, or Linux computer can be used to deliver ping commands. It’s a useful tool that has been around since the beginning of the 1980s. Sonar technology, which puts out a sound wave and then waits for a ping (or echoes) in response, is where the phrase originates. An object must be further distant the longer the delay.
As data requests travel around the world, networks operate under the same premise. Pinging can also reveal network slack or other delay issues, such as a downed server. Running a ping test is not that difficult.
How To Run A Ping Network Test?
Depending on the operating system you’re running, there are different stages to performing a ping network test. Go to the taskbar’s Search option in Windows 10 and:
- To open the Command Prompt, type “cmd.”
- Launch the Command Prompt window.
- Enter “ping” into the text field and press the space bar.
- Enter the IP address that you want to ping (e.g., 192.XXX.X.X).
- Examine the ping findings that were shown.
The same procedure applies when using a Mac. Open Network Utility and enter the hostname or IP address you want to ping. Launch the Linux terminal. The traceroute command can be used to examine the various IP addresses that your request travels through. To accomplish this, just:
- Start up Terminal.
- Type “traceroute” and the IP address or URL you want to trace, then press Enter.
- Press “Enter,” then go over the outcomes.
What Are Some Common Addresses To Ping?
You can just check your own internet connectivity when running your ping tests. To do this, you must confirm that the IP address you are pinging is actually operational. Even though every address might occasionally experience an outage, here are some reliable options for you to ping:
22.214.171.124 and 126.96.36.199 (Cloudflare)
188.8.131.52 and 184.108.40.206 (OpenDNS)
220.127.116.11 and 18.104.22.168 (Google DNS)
When you ping these IP addresses to check for connectivity, if you don’t get a response, there is probably an issue on your end.
Understanding Ping Results
All of those processes are fine and excellent, but unless you can read the findings, the entire procedure isn’t really useful. So let’s get started with it. The hostname of the server will be the first thing you see.
This will demonstrate that your connection to the server is active. The following information is the number of bytes being transferred to the server, which normally displays 32. The server’s response time is shown in the next four lines.
You can see how many bytes of information were sent back and how long it took for the response to arrive in milliseconds. Time to live, or TTL. You can see here how many routers the packet will pass through in total before coming to an end. When you notice “request timed out,” it means that the packets were unable to connect to the host, which is an indication of a connection issue.
The process’s overall statistics are displayed in the Ping statistics section. The packets line indicates how many packets were transmitted, received, and whether any were lost. If so, there would be a connection problem. Finally, rough round trip times demonstrate the connection speed. The connection becomes poorer the longer the time.
Troubleshooting Ping Connectivity Errors
Several different error messages could appear when you do a ping test. Here are some typical examples and what they may indicate:
- Unknown host: You’ll most likely see this message if the host’s IP address cannot be resolved when you ping it. It basically signifies that the domain’s nameserver is not recognized. Verify that you are using the right nameserver. If you do, the problem might be with the name resolution procedure itself, in which case you must check the DNS or WINS server’s availability status.
- Destination host unreachable: This could indicate that the remote network or the PC does not have a route to the location you are attempting to ping. There is no path from the PC if the message just states, “Destination host inaccessible.” If it states, “respond from IP address name>,” then the router is at fault.
- General failure error: If you’re receiving this message, your network card or wireless adapter may be malfunctioning in your computer or laptop. Make sure your device has an IP address and check your device driver.
- Request timed out: This message indicates that the location you are pinging cannot be reached. If it is unquestionably operating, a firewall or a destination that is dropping ping packets may be the issue. Check your settings because a firewall is typically to blame for this warning.
What Are Other Uses For Ping?
In addition to running ping occasionally, you may also run it continues to maintain a steady flow of data. The ping program in Linux runs until the user decides to end the process. To achieve this, press CTRL while also pressing C.
In Windows, the command is the same. And in that OS, execute “ping -t” in the Command Prompt to make ping run indefinitely. There are numerous third-party applications available to track and display your ping results if you need more comprehensive pinging capabilities than those offered by the majority of operating systems by default. For producing quarterly reports for stakeholders, these can be useful.
Here we sum up all information about being Unable To Ping A Computer On Same Network Make sure all computers are connected carefully. If either machine has internet access, you can also check by opening any website I suggest Google.com, and then comparing the IP addresses. Both addresses must be in the same network range. You will undoubtedly be able to interface with these systems if you follow these instructions.
Frequently Asked Questions
Why can’t I ping a device on my home network?
I would check the default gateway if you are unable to ping that machine and they are unable to ping you. It’s possible for your “router” (default gateway) to discard ICMP packets, which are responsible for “pinging.” If one machine responds to ping requests but not the other, a host firewall is almost probably to blame. In other words, the computer itself is the problem.
Why can’t I ping my own computer?
Your local IP address, which typically starts with 192.168., 10., or 172. [16-31] on your LAN, may be used instead of the IP your provider has allocated to you. You can verify your assigned IP on websites like http://whatsmyip.net/.
Why is ping not working?
It indicates that your ICMP (ping) packet was silently rejected without a response being sent. Ping may not be enabled on the router or (more likely) the endpoint, for example, which are two possible causes. The network is overloaded or improperly set up.
How do I enable ping without turning firewall off?
Verify the inbound and outbound rules. Find the file and printer sharing guidelines in the right pane (Echo Request – ICMPv4-In). To enable a rule, select it using the right mouse button. The ping issue might be solved as a result.
How do I enable ping without turning firewall off?
· Click to launch Windows Firewall after searching for it.
· On the left, choose Advanced Settings.
· Click Inbound Rules in the resulting window’s left pane.
· Find the “File and Printer Sharing” rules in the right pane (Echo Request – ICMPv4-In).
· To enable a rule, select it using the right mouse button.