RCA Tablet RCT6773W22 Won’t Turn On | Causes+Solution

Post Disclaimer

We independently review everything we recommend. The information is provided by RCA Tablet RCT6773W22 Won't Turn On | Causes+Solution and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

If you possess an RCA tablet and RCA Tablet RCT6773W22 Won’t Turn On, you’ll soon discover that they’re notorious for shutting off at the most inconvenient of moments. If that’s the case for you right now, don’t worry; one of the following tips may be able to get your tablet working again.

RCA Tablet RCT6773W22 Won’t Turn On

At same time, press the volume up and power buttons for 10-20 seconds. Give it a try once or twice. Wait a few minutes, then try holding down the power and volume buttons once more if it still won’t switch on. Additionally, they advise you to try charging it via your computer because, in the event of a defective tablet charger, the USB sometimes manages to restart the charging process.

I’ve used these ways to resurrect dead tablets, particularly RCA ones, on multiple occasions. All RCA Tablets whether Android or Windows are affected by this change. There must be a problem with your tablet’s boot process or a file that prevents it from entering the operating system. A hard reset of the iPad is your best bet.

RCA Tablet RCT6773W22

In doing so, you will be wiping all of your existing user data. Be aware of this before proceeding. This can be completed by closing down the device. Hold down the volume up and power buttons at the same time to enter recovery mode.

The android robot with the red exclamation triangle should appear after a few seconds of seeing the red RCA emblem with the dog.  The recovery menu can now be entered by holding down the power button while also pressing the volume up button once.

Use the volume up & down buttons to select Wipe Data/Factory Reset, and then press the power button to complete the process. When the process is complete, restart the computer and see if you can get back into the system.

Please understand that this is a problem only with the RCA tab that refuses to switch on no matter what you do while pressing the power button. The same is true if you connect your device’s charger to it.

What Kind Of Equipment Is This For? Any RCA-branded tablet, regardless of the operating system, is affected by this. If you have a tablet, give these tips a whirl and see what happens.

How Do I Get My RCA Tablet To Work Again?

Do keep in mind that there is no one-size-fits-all solution for every scenario, so be patient as you attempt each of the tips below one at a time.

  1. In addition, if your phone has a MicroSD or SIM card, please remove these before you begin.
  2. Turn the gadget over and look for a reset button or hole next to it. Press the button in the hole with a straightened-out paper clip and hold it there for around 20 seconds until the screen illuminates and the device powers on.
  3. Press and hold the power button for 30 to 1 minute with a hard press to ensure that it is the power button. In the majority of circumstances, the Tablet should be able to turn on.
  4. Be certain to click the Power button rather than the Windows key when using a Windows 10 RCA tablet.
  5. This is for individuals who have Android RCA Tablets that come on for a split second, and then go out of battery life. After pressing the power button for a full ten seconds, swiftly plug in the charger that is already attached to the device. The Tablet should now begin charging instead of shutting down and restarting.

A pick or something similar is all that is needed to separate the two sides of a tablet, which are usually clipped together. It’s possible to disassemble some of them thanks to the presence of screws. Remove the battery and leave it unplugged for a few minutes once you’ve done that. While the battery is detached, you can also keep the power on for a minute.

Reconnect the battery after you’re done, and it should function again in certain circumstances. Even if you have a brand-new tablet, the battery may be swollen or damaged and need to be replaced. Replacement of the display or backlight may be necessary for some instances, such as when you drop your phone.

What Would Cause A Tablet Not To Turn On?

A charger issue is the most frequent cause of a tablet not charging. However, other potential problems could also be to blame: The charger is defective on its own. The USB charging cord is broken or malfunctioning. The tablet’s charging port is soiled or damp.

Conclusion

After all, is said about RCA Tablet RCT6773W22 Won’t Turn On and done, I’d love to know if this worked for your RCA Tablet or any other tablet. If so, please share your story in the comments below and be as detailed as possible, as this could help someone else who is coping with the same issue. Don’t forget to share this article and check out some of the other items on this page as well.

Frequently Asked Questions

When your RCA tablet freezes up, what do you do?

As soon as you see a start-up logo on your screen, press Power and Volume Up. When the logo appears, release the buttons and enable the device to enter System Recovery Mode.

Why does the screen on my RCA tablet not work?

If your RCA tablet isn’t responding or has abruptly frozen, you’ll need to know how to perform a hard reset. RCA tablets include a reset button on the rear, unlike most other tablets. Because the button is recessed, a pin or paper clip may be required to press it.

My iPad won’t charge or turn on. What’s going on?

Problems with charging Android tablets are almost always caused by the charger or the charging port. If you’re having trouble charging your tablet, try putting it in Airplane Mode and turning down the brightness to see if that helps. If the situation cannot be fixed, back up your files as soon as possible.

What’s up with my tablet’s blank screen?

If you drop your tablet from a high altitude or even just a few inches, you may end up with a broken system or a broken screen. This can occur as a result of the installation of one or more incompatible applications; if this happens repeatedly, the screen will go dark. Battery failure may be the cause of a blank screen on Samsung’s devices.

Similar Posts