Why Does Mavic Mini Propeller Spinning Too Fast? Cause+Fix

The propeller, which produces lift for the aircraft, is one of the most important pieces of a drone. It’s typical for drone propellers to malfunction due to excessive rotation speed, which can significantly impact how well your drone performs. Why Does Mavic Mini Propeller Spinning Too Fast? And the possible reasons for this phenomenon will be discussed in this article.

Mavic Mini Propeller Spinning Too Fast

When your propellers are damaged, and the usual physics of the propellers is disrupted, they will spin too quickly. To keep the drone aloft, damaged propellers will have to spin faster.

Propellant overspending was previously difficult to detect; however latest DJI updates now display a “Motor Speed Error” warning to alert the user to the problem.

The ‘Motor Speed Error’ warning has been argued as a bug by DJI drone users. To get rid of the notification, some customers will go so far as to downgrade their firmware. Downgrading your firmware merely removes the notice, but your propeller issue will continue. As for the eventuality of your drone falling from the sky, be prepared.

What Causes The “Motor Speed Error” Warning To Appear?

Propeller Or Motor Speed errors can be caused by bent or damaged propellers, as the propellers will spin up to make up for the lost lift twice as quickly. If you don’t store your propellers correctly or if you crash your drone into a wall, tree, or any other object, it may become bent or destroyed.

How Can I Resolve A Motor Speed Error Message?

When your DJI drone displays the “Mavic mini propeller spinning too fast” notification, immediately land your aircraft. Examine your drone for visual signs of damage after safely landing. If you notice a bent propeller, you can try to straighten it and check if the problem message persists.

Any propellers that can no longer be salvaged due to damage (such as bent or chipped) must be exchanged for new ones. Flying a drone with damaged propellers is a bad idea in the long run since you run the danger of overworking your drone’s motors and draining your batteries prematurely. Drones falling from the sky are the worst-case scenario.

How Can Propellers Be Kept In Good Condition?

Drone propellers are most likely to be damaged if flown in an enclosed area with many obstacles, such as trees, buildings, and the like. Protect your propeller from obstacles by using propeller guards when flying in an area where items could collide with your drones. Fly cautiously to avoid causing damage to your propellers or other parts of the device.

Propellers can be damaged or bent if they are not properly stored when they are not in use. Learn how to store your drones in our guide safely. Propellers should be folded horizontally or removed completely before shipping to avoid being forced down or damaged.

Keeping your drone in storage for an extended period necessitates extra care in how it is stored. If this is not prevented, the propellers could be forced down for an extended period.

Back propellers are more likely to be bent or damaged than front propellers. This can be prevented with recommended storage containers like the Fly More Combo Soft Case. Lower propellers can be rotated to face the gimbal or parallel with this tool. Propellants in this position are not under any stress in the container.

Putting the drone and battery in the case immediately after flying is also a bad idea since it could damage the battery. This is to keep the propellers from warping due to heat from the plane or batteries.

How Do You Replace The Propellers On A Drone?

It is necessary to replace any broken, warped, cracked, or loosely screwed propellers on the aircraft. The process of changing a drone’s propellers isn’t difficult if you’re handy with tools and familiar with your drone.

To change the propellers, you will need the original screwdriver and screws that came with your drone. Two sets of propellers will be fitted on the motor, one set clockwise and one set counterclockwise. Use the manual to verify that you’re using the correct propellers and motors.

To change your propellers, below are a few basic procedures to follow:

• Step 1: Using a screwdriver, unscrew the propeller’s screws. Place the driver on the cross recess of the screw and crank it counter-clockwise to unscrew.
• Step 2: Stability can be improved by replacing both propellers on the same motor. The old propellers and screws should be thrown away after removal for the sake of convenience.
• Before attaching the new propeller to your drone, you may need to remove the thread locker from the screw hole. Check the screw hole for cleanliness, and if it isn’t, use the old screws a few times to clean it or use a pipe cleaner to remove debris.
• Step 3: It’s time to insert the new screws into the driving shaft with the screwdriver in step 3. As soon as you’ve finished aligning the screws, tighten them down. To spin the screws clockwise, a screwdriver must be inserted into the cross recesses.
• Step 4: Drive the screws in as far as you can without encountering too much resistance. But if you get a strong resistance, check to see if the screws are correctly put. To ensure there isn’t any dirt in the screw holes, you should do as we mentioned earlier and clean them.
• Step 5: The screws should be tightened now. Drive in the screws until they are well seated in their sockets before doing this.
• Step 6: Afterward, when the screws have been installed, carefully pull the propeller to ensure it is securely linked to the engine. You may check the smoothness of your propeller rotation by turning your drone one way. If you mounted it properly, this should be possible.
• Step 7: If you’d want to be prepared for the next time you need to swap out your propellers, you can place an order for some new replacements in Step 7.

Your propellers will be replaced with ease if you follow this technique.

How Fast Do DJI Drone Propellers Spin?

Typically, a drone propeller rotates at the speed needed to enable flight. According to Virginia Tech experts, most drone propellers spin at a pace of 8000 revolutions per minute (rpm). That equals 133 times every second.

Conclusion

This post described all instructions about the Mavic Mini Propeller Spinning Too Fast. Hopefully, this is quite useful while resolving the issue.

Frequently Asked Questions