How To Use USB Headset On PS4? Full Procedure

In general, there are two ways How To Use USB Headset On PS4? Regrettably, it’s rarely as easy as simply plugging anything in. USB headphones are far superior to those with a 3.5mm jack connection.

To acquire the same results as an inexpensive USB headset, you might require a more expensive headset with an audio jack. I like to use a USB headset since I have to speak quietly when playing, and a USB mic seems to pick up my voice better than a jack mic.

The cable is the disadvantage. A USB Microphone must be hooked into the PlayStation 4, and unless you are sitting at a desk or directly in front of the PS4, you will have a length issue.

I haven’t been able to find a USB Headset with the necessary cord length to play on my couch. As previously stated, if you’re a streamer, you’ll most likely be playing at a desk, so cord length won’t be an issue, but for everyone else, an external mic is recommended.

How To Use USB Headset On PS4?

Go to ‘Settings’ > ‘Devices’ > ‘Audio Devices’ should be chosen. Choose the audio input source to employ. Change the audio input level of a USB microphone or headset for chatting or broadcasting. This setting is not active while you are using the speech recognition function.

Attachment Of USB Headset To A PlayStation 4

If your headset, like many Razors’, has a 3.5mm connector, the first step is to plug it into the bottom of your Play Station 4 controller. After you’ve hooked everything in, go to the settings menu and pick Audio Devices from the Devices tab. If it hasn’t done so already, change the Output option to “Headset attached to the controller.”

Set the input set to the same choice if this headset has a microphone. After that, make sure the Output to Headphones option is set to “all audio.” You’re good to go after that, however, clicking the “Switch output device automatically” box wouldn’t hurt if you have to do it all manually.

Even if you’re merely connecting a dongle for a wireless headset, the method should be the same if you’re using a USB headset.

Before performing the instructions above, go to the Sound and Screen tab in the main settings menu if your headset employs a base station that requires an optical connection.

Then, under the Primary Output Port, choose “Digital Out.” You may also need to adjust the Audio Format (Priority) setting, however, this is dependent on the headset you’re using and should be detailed in the instructions. After that, you should be ready to play games on your headset Play station 4.

How To Connect USB Headset To PS4?

Squeeze the power button to turn the PS4 system on.  Attach the other end of your PS4 controller wire to the USB port on your gaming console.  Press and hold the PS button on your controller for about three seconds. Next, connect your wired PS4 controller to the gaming system.

Can You Use An USB Headset On PS4?

Accessed via (Settings) > [Devices] > [Audio Devices]. Choose the source of the audio to be played. Set the volume for a USB microphone or headset while talking or streaming. This option is turned off while you are using the speech recognition feature.

How To Use A USB Mic And Headset On Ps4?

Holding the PS button while both devices are connected should allow you to change the chat settings’ audio output options.

Conclusion

It’s finished! In a couple of minutes, you’ll figure out How To Use USB Headset On PS4? Despite their apparent simplicity, getting a gaming headset to operate on your preferred platform can be a difficult task.

Maybe your audio output is being hijacked by a mic on your PC’s camera, or by a dropdown menu in your Play station 4’s settings menu. This stuff shouldn’t be difficult, yet it can be.

Frequently Asked Questions