How To Measure TV Size? Full Procedure

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Measure TV Size? Full Procedure and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

Have you set your sights on a new television for your sitting room or bedroom? We’ll show visitors How To Measure TV Size? To improve their watching experience, Deciding out what size Television to buy might be a difficult task if you don’t know what to look for. You can end up with a TV that’s far too huge or small for your space, leaving you squinting at the details or unsure which portion of the action to concentrate on.

Maybe you’re at home, trying to figure out where to put your television in the living room. Perhaps you’re in the market for a new TV and want to verify guaranteed it will fit in a particular location at home. Perhaps you’ve read our post on how to mount a television on the wall. In any case, knowing how to properly measure a television is critical.

How To Measure TV Size?

The best way to determine your TV’s true screen size is to measure it diagonally, from corner to corner, without including the borders. Bring your tape measure when shopping for a new TV in a store. You may then compare real screen sizes, picture quality and functionality.

Measure TV Size

The first thing to remember is that whenever you see a TV’s size indicated, it refers to the screen’s diagonal length – many consumers mistakenly believe it relates to the screen’s width. This measurement does not include the television’s bezel (the border that runs around the boundary of the screen), therefore it does not represent the television’s entire size.

Even though bezels are getting thinner as technology advances, they still take up additional space, so make sure you contribute to that. It’s also worth noting that when you evaluate the screen on your television, it will most likely be a little shorter than the quoted size.

This is completely normal: a part of the screen is merely hidden beneath the bezel, and it is an unavoidable component of the production process. In most cases, the difference is only a few millimeters. To determine the size of a television, you’ll need to take four independent measurements. Have you had your measuring tape ready? Let’s get this party started.

Step By Step Approach For Measuring Television

You’d be forgiven for assuming that when you buy a 55-inch TV, for example, the display size is approximately 55-inches. That is, however, a relatively rare occurrence. Manufacturers, in reality, measure the screen panel diagonally from corner to corner, ignoring the space taken up by the edges (or bezels).

Assuming your TV is entirely borderless, it will most likely be slightly smaller than the claimed size. Hopefully, you haven’t already put the measuring tape away. The best approach to determine the real screen Size Of Your TV is to measure diagonally from edge to edge, ignoring the borders.

Take your tape measure with you when shopping for a new TV in a store. You’ll be able to examine actual screen sizes, as well as picture clarity and features, this way. If you want to put the TV in a box or entertainment unit, you’ll also need the TV’s height and breadth, as well as the dimensions of the space where it will be placed.

Remember to check the width from the stand’s base, not simply the screen! It’s ideal to leave at least 2 to 3 inches between either side of the TV and the unit when connecting in your gaming system and Blue-Ray player for maximum ease. Whenever you move the display around or plug in an HDMI cable, the TV will not be damaged.

Take A Diagonal Measurement Of The Screen

Run your tape horizontally across the screen of your television, from one top corner to the other, or vice versa. This will reveal the TV’s screen size – although, as we previously stated, don’t be amazed if the reported size differs by a few millimeters.

Take A Diagonal Measurement Of The Entire Television

Make the same measuring system as before, but this time spread your tape across the whole face of the screen, including the bezel. Many consumers neglect this step and then assume that the screen size of their television is identical to the physical dimensions.

Take Height And Horizontal Measurements Of The Television

To determine the horizontal width of the television, run the tape diagonally across its face. If you’re going to put the TV in an alcove or another small space, make certain you leave a few inches on either side so you can properly install and remove it. Then repeat the process vertically.

Determine The Television’s Depth   

Determine the Width Of Your TV with the tape. Because many televisions don’t have completely flat rear ends, you’ll need to examine the maximum depth. Make sure you leave enough room at the back to handle the wires that will run to the power source.

You’ll be able to make informed decisions decision about where to install your TV at home using these 4 sets of measurements. If you keep them in mind when shopping for a TV, on the other hand, you can evaluate a set in-store to see if it will fit into your observing space.

Measure The Area Where Your TV Will Be Installed

Knowing the overall Size Of The TV will give you an idea of how much space it will require for installation, but you should also measure the width & height of the space where you’re TV will be installed. If the TV will be mounted on a wall or in an open space, the most important issue is that there is enough room for the stand.

If the wall room does not have any borders, you may have to struggle with width. If you’re putting your TV in an isolated room, like an entertainment center, make sure there’s at least a 2-to-3 inch gap on both the right and left sides, as well as the top & bottom (counting the stand) so it can be moved in and out safely.

How To Measure TV Size For Room?

Viewing distance (in inches)/2 = recommended TV size. For instance, if you typically watch TV from a distance of 10 feet, that is 120 inches (10 feet x 12 inches).

How Is A 55-Inch TV Measured?

How are TV screen measurements determined? The diagonal length of a TV screen is measured from one corner to the other. For instance, a 55-inch TV is 55 inches when the screen alone is measured.


So, we’ve covered everything you need to know about How To Measure TV Size? which will undoubtedly assist you in this regard. You may need to have a TV external cover or construct a TV holder at times, and to do so, you must first determine the size of your television.

Frequently Asked Questions

How do I know what size TV I have?

A TV screen’s diagonal measurement is taken from edge to edge. A 32-inch television measures 32 inches (81 cm) from lower left to top right, or lower right to top left.

How can I figure out what sized TV will fit in my room?

If you do not even want to use an internet calculator, you can use the following math to figure it out on your own: In inches, multiply the distance between your seat and the television by 0.84. This should provide you with the optimum screen size as well as the appropriate space size.

How do you calculate the size of a 42-inch television?

The horizontal distance from one edge of the screen to the bottom left corner is used to describe TV sizes. A 42-inch display, for example, has a diagonal measurement of 42 inches from left to right at the top and bottom, respectively (or the lower-left corner to the upper right corner).

Is a 75-inch TV over large?

It’s not too enormous for theater-like immersion, and there’s room to get even bigger. You might think it’s a little too big for casual day-to-day TV viewing, but if you’ve just had the TV for a brief duration, you’ll grow used to it quickly.

Similar Posts