How To Install Windows On A New Hard Drive Without Disk?

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Install Windows On A New Hard Drive Without Disk? and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

Most forums and Google searches recommend doing a clean install of Windows 10 On A New Hard Drive or new PC. Do you understand Windows 10 Installed On A New Hard Drive? But How To Install Windows On A New Hard Drive Without Disk? And how do you go about installing Windows 10 on a brand new hard drive that has no previous installation media or media attached to it?

This guide will show you three different methods for installing Windows 10 on a new hard drive, each with its own set of detailed instructions and screenshots to guide you through the procedure. Take the time to read in-depth.

How To Install Windows On A New Hard Drive Without Disk?

You can use Windows Media Creation Tool to install Windows 10 after changing the hard drive without a disk. Create Windows 10 installation media with a USB flash drive after downloading the Windows 10 Media Creation Tool. Finally, use a USB to install Windows 10 on a fresh hard drive.

Install Windows On A New Hard Drive Without Disk

Installing Windows 10 From An Existing Hard Drive To A New One Using System Transfer

Installing Windows 10 on a new hard drive can be difficult for home users who don’t have much IT experience because it requires downloading and installing the ISO files and going to burn them to the hard drive’s designated location. They’re at a loss as to where to begin. Instead of relying on others to finish the job, why not try anything really simpler?

EaseUS Todo Backup is a simple system transfer tool that makes it simple to install Windows 10 on a unique hard drive without needing an installation CD. This section introduces the tool. To finish installing Windows 10 on an empty hard drive, use the system transfer feature to create a system image backup and restore the new hard drive with a few simple clicks.

Using EaseUS Todo Backup, you can create a foldable Windows USB drive and migrate Windows 10 to SSD while also backing up files, the system, and disks/partitions. Use the transferred feature of EaseUS Todo Backup to rapidly and effortlessly install Windows 10 on the latest hard drive with no need for a disc.

Step 1

Make a USB Flash Drive Emergency Disk You should have a USB flash drive or an external hard drive with at least 100GB of space connected to your PC.

Note: Create two partitions on the external hard drive or USB flash drive, one for FAT32 and the other for NTFS.

To create an emergency disc open EaseUS Todo Recover and go to Tools > Create Urgent Disk.

Step 2

Click on Create picks and chose USB as the disc location for the emergency disc. In order to transfer system images to your new PC, you’ll need a bootable disc. Next, create a device backup image on the computer that you intend to restore. Windows OS will be chosen by default when you click System Backup in the left pane.

Then click Browse to select the second USB drive partition containing the backup system image. An additional empty external hard drive can be used to keep the system backup image (It has to be at least as large as the system C hard disc). Setting up a system backup portrait on the target device begins after you click Proceed.

Step 3

Use EaseUS Todo Backup Case of emergencies Disk to boot the target computer. Disconnect and reconnect the old computer’s USB flash drive to the new one, then eject the EaseUS emergency disc. Press F2/F8 to enter the BIOS after restarting the PC. 2.

Set the pc to boot from the EaseUS Todo Storage emergency disc by going to the boot menu. To use a GPT disc to restore this same system image, change the BIOS boot mode to EUFI. After that, you’ll be greeted by the main screen of EaseUS Todo Backup.

Step 4

Install the Operating System on the New Computer the information on the target disc will be erased if you restore the system image to a new computer. To avoid data loss, remember to back up your files ahead of time or restore the operating system with an empty disc.

  • From the main EaseUS Todo Backup screen, select System Transfer.
  • To continue, select the operating system on your USB external monitor and click OK.
  • In the Advanced settings, select the disc to restore the system image and check System Transfer. To save your changes, click OK. Then click Move ahead to begin the system transfer to a new machine.

Step 5

Restart the computer with the newly transferred system. Go into BIOS and set the computer to boot from the transferred system disc. Restart your computer after saving all changes. Upgrade all drive programs and programs to guarantee that everything on the new pc works properly. With the EaseUS system creating backup software, installing Windows 10 on a new hard drive is no longer difficult.

There is no requirement for a Windows setup USB flash drive or ISO file. If you get the error system restore did not finish successfully with errors,’ use the solutions in this article to resolve the issue. EaseUS Todo Backup can also be used to build a system image on a USB device and restore it from an external hard disc.

How To Install Windows In A New Hard Drive?

  • Install your computer’s new hard drive (or SSD).
  • Insert the Windows 10 installation disk or USB drive, whichever you like.
  • To boot from your installation media, modify the boot order in the BIOS.
  • Start Windows 10 installation using a DVD or USB disk.

Can You Install Windows Without A Disk Drive?

When given the option, select the boot device as a UEFI device. Then, on the second screen, select Install Now, followed by Custom Install. Finally, at the drive selection screen, delete all partitions except for Unallocated Space to make the drive look as clean as possible. Then, select Unallocated Space and click Next to allow it to create and format the necessary partitions.


After reading this post, you should be able to know about How To Install Windows On A New Hard Drive Without Disk? as well as from a USB disc. You should Reinstall Windows using the way that best suits your needs.

Frequently Asked Questions

How do I reinstall Windows after a hard drive failure?

Windows 10 should be reinstalled on a fresh hard drive.
• Back up all of your documents to One Drive or another cloud storage service.
• Go to Settings>Update & Safety while your old hard disc is still connected.
• Insert a USB device with enough space to hold Windows and backup to it.
• Turn off your computer and insert the new hard drive.

Is it necessary to reinstall Windows after a hard drive replacement?

You should reinstall the os on the new drive after you’ve completed the hardware repair of the old hard drive. After that, learn how to install Windows after repairing the hard drive. As an example, consider Windows 10: Boot from the installation DVD for Windows 10.

What happens if I replace the hard disc with a new one?

While a clean installation is usually faster than transferring your OS to the new disc, it does require you to reinstall the apps and games you want, as well as recover your personal documents from backups (or copy them from the new drive)

Is it possible for me to install Windows on a separate hard drive?

You can install the secondary copy of Windows on this disc if you have purchased a new hard drive or are using a spare one. If you don’t even have one, or if you can’t install one because you’re on a laptop, you’ll have to partition your existing hard drive.

Similar Posts