How To Hang LED Strip Lights Without Damaging Wall? Process

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Hang LED Strip Lights Without Damaging Wall? Process and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

Are you seeking How To Hang LED Strip Lights Without Damaging Wall? Or how to install led strip lights without damaging wall? There are LED strip lights available for this purpose. Consider putting ambient task lighting around your kitchen cabinets. There are LED Strip Lights available for this as well. Whatever your need is, LED strip lights are likely to provide a cost-effective, adaptable, and simple-to-use solution. What’s not to like about that? The majority of LED strips include 3M adhesive backing.

How To Hang LED Strip Lights Without Damaging Wall?

The sticky covering can be peeled off after the surface has been prepped and the strips have been cut to the desired size. Apply mild pressure to the strip as it is placed on the appropriate surface. It’s never been easier to achieve the lighting effect you want in your home or business with LED strips. However, things aren’t always easy.

When it comes to their sticky backing, LED strips frequently fall short it’s not strong enough, don’t sell well, decline over time, and so on. So I’ll teach you how to increase the likelihood that your LED strips will form a strong bond with the surface on which they’re placed. Continue reading for step-by-step instructions on how to Install LED Strip Lights on a wall and what to do if they start to droop or peel.

On A Wall, How Do You Put Up LED Strip Lighting?

What do you do now that you’ve purchased a 5-meter roll of LED strip lights? Let’s get a hold in progress. If you haven’t yet purchased strip lights, make sure to read my LED strip lighting instructions.

Step 1: Measurement

The first step is to determine the size of the area where the LED lights will be installed. This can be done with a ruler or a tape measure. There will be no guesses.

Step 2: Trim To Fit

If necessary, trim your LED strip to the proper length. For this, you’ll need a sharp knife or a pair of scissors. Only cut along the lines that have been drawn. If you sever your strips in the wrong place, the circuitry will be damaged, and some of the LEDs will stop working. If you cut your LED strips, you’ll almost certainly need to solder a new connection cable.

Step 3: Get Your Surface Ready

LED strips’ sticky backing works best on smooth, clean surfaces. When grease or dust comes in the way, the adhesive’s connection to the surface is compromised, and they are unable to make a firm bond. To prevent this, moisten a cloth with hot water or scrubbing bubbles and vigorously massage the surface back and forth. Dry that area with a toner towel or paper towels once you’re pleased.

Step 4: Remove The Adhesive Backing

Peel off the plastic sticker from one end of the strip to reveal the attachment to an individual. Only peel a small amount at a time to avoid dust or debris from clinging to the adhesive.

Step 5: Put Yourself In A Good Position And Press The Button

Hang The LED Strip in the proper location and press it into the surface with your hand. Continue peeling, positioning, and pressing until the total length adheres to the wall. Don’t rush through anything; set aside time to complete it.

Step 6: Turn On The Lights

Turn on your LED strip lights by connecting the connector cord to your power supply.

What Types Of Walls Are Affected By Strip Lights?

Let’s face it: interior design is constantly evolving. Your personal style and preferences were not the same as they were one, five, or even ten years ago. Anyone else recalls pleading with their family to let them repaint their room a bright color? How do you think you’d feel about its decision now?

You’re not going to be doing the same LEDs lights in the same place for the rest of your life. So, once they’ve been put down, how simple is it to get them out? The answer is contingent on the type of surface to which you attach. You should have no trouble if your surface is tile, wooden, or plastic.

The sheets will be reasonably simple to remove and will not damage the wall. If anything, there might be some adhesive remnant that needs to be cleaned up. If your surface is raw drywall, painted, or wallpapered, however, issues may develop. These surfaces are more vulnerable to damage since they are made up of multiple weak layers.

At the end of the day, wallpaper is only paper. Any type of paper will produce an excellent bond if you use strong glue. That is why we use sticky tape to wrap our gifts! When it comes time to take down your LED strips, though, you’ll find it difficult to separate the two components. It’s very likely that your wallpaper will tear, rip, or ripple.

This will be especially aggravating if your decor is patterned since any holes will stand out like a sore thumb. Similarly, because of wallpaper is patterned, you won’t be able to hide the damage with paint.

How To Hang Up Led Lights Without Adhesive?

Double-sided sellotape works well. This thicker cellotape is robust and effective. A thin plastic cover on both sides must be peeled off, but only from one side initially. When the first side displays adhesive, place it on the wall without removing the second thin cover before pressing the first side hard into the wall.

When the first side has a solid hold, remove the top side cover plast and press the LED strip firmly against the top side. It will stay in place. It won’t drop. After a short period, check and press the topside again for safety.

Do LED Lights Damage Walls?

Wall damage from LED strip lights is unlikely, but it relies on several circumstances. How effectively LED strips stick to a surface will also depend on their adhesive strength, how long they’ve been applied, how durable the paint or wallpaper is, and the climate.

How To Stick Led Strip Lights On The Wall Without Damaging The Paint?

Put 3M adhesive in a hidden spot in your house, such as a nook or behind a cabinet. To check if it harms your paint or wallpaper, leave it on for a day or two and remove it. Have you ever attempted to remove LED strip lights before?


Above all information is concluded here about How To Hang LED Strip Lights Without Damaging Wall? True, LED strip lights are a dream of mine for renters and persons who like to change their interior design choices on a regular basis, You can always do a patch test if you’re still not sure.

Apply 3M adhesive to an inconspicuous location of your property, such as behind a cupboard or in a nook. Allow it to sit for a day or two before removing it to check if it has damaged your paint or wallpaper. Have you ever attempted to Remove LED Strip Lights before? What were the products you used? In the comments box below, let me know if you were successful or not.

Frequently Asked Questions

Is it true that LED strip lights wreak havoc on walls?

LED strip lights are insufficient to experience wall damage, although this is dependent on a number of circumstances. The strength of their adhesive, the longevity of paint or wallpaper, the length of time they’ve been applied, and the weather can all affect how effectively LED strips adhere to a surface.

Is it true that LED strip lights attract bugs?

Because various bugs sense different wavelengths, it’s impossible to say whether or not an LED light will attract them. LED lights to emit very little UV light and very little heat, making them less appealing to bugs—as long as they emit long wavelengths of light.

Is it possible to take down and reinstall LED lights?

When transferring Gove Lights to a new location or room, they can be reused. However, utilizing leftover strips will necessitate some human labor, as well as sourcing and purchasing all of the necessary parts to put it all together.

Is it possible to hot glue LED light strips?

Apply a dab of hot glue to the cut end of the LED tape or the cut point that needs to be waterproofed, and then cover it with heat shrink. You can then use a heat gun to tighten/contract the adhesive by heating the heat shrink. This will restore the original IP67 rating of your LED tape.

Similar Posts