How To Fix Earbuds That Work On One Side? Solution + Guide

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Fix Earbuds That Work On One Side? Solution + Guide and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

Some people believe earbuds to be a godsend in a world that is becoming increasingly noisy. While working, listening to music beats might help block out background noise, and there are times when you just want to watch a film without being distracted. As a result, a malfunctioning earphone might ruin your day. When this happens, it’s not always practical to run to the store and get a new earphone, so we’ll show you How To Fix Earbuds That Work On One Side?

If you’re wondering why you can only hear from one earbud on your Smartphone or computer, one of the most likely reasons is a Broken Wire, usually the one that connects to the now-mute headphones.

How To Fix Earbuds That Work On One Side?

Try twisting and taping the cord to restore sound if a single earbud periodically loses sound. If twisting the wire doesn’t work, you might have to open the earbud and, if you can, solder the connection. You might occasionally need to purchase new earbuds.

Fix Earbuds That Work On One Side

How To Troubleshoot And Repair Earbuds?

If you’re not in a rush to replace the earphone, learn How To Troubleshoot And Repair Earbuds? That has one side that is mute.

Make Sure The Earphone Cord Is Straight

If you constantly wrap or tie your earphone cables to fit them into your bags, this could cause one or both earphones to stop working. You’ll need to troubleshoot to figure out which component of the cord is impacted.

  • Plug in your earphones to your Smartphone and start listening to music.
  • Feel the cord and smooth it out one location at a time while listening to it.
  • Pay attention to where you touch to get both earbuds to function and write it down. You should wrap the paper tape around the location (at least 3 times) to keep it straight because the cable around it may have broken.

Attempt Using A Different Set Of Earbuds

If you want to Fix Earbuds that only work on one side, you must first determine whether the problem is due to a flaw in your phone or a Defect In Your Headphones, after which you can focus on how to fix earphones that only work on one side.

You should try a different pair of headsets for this. If the second pair of earbuds operate properly, your earphone is the source of the problem. If not, you’ll have to solve several bugs in your Android smartphone to get it back up and running.

If it turns out to be a phone issue (the second set is also functioning with one ear), the headphone jack should be cleaned. For instructions, see the following solution.

The Headphone Jack Should Be Cleaned

The presence of junk in your headphone jack may be one of the Reasons Why Your Earbuds Aren’t Operating Properly. Do you know how you occasionally leave your phone unattended in your pockets and bags, especially in dusty environments? Debris can get into the headphone jack, preventing one or both ears from functioning properly.

Cleaning The Headphone Jack Can Be Done In Several Ways

If you have compressed air on hand, point the valve at the port and blow away the dirt with four sprays. Although this is unlikely to harm your headphone jack, it may not be able to remove tenacious dirt caught in the jack’s corners.

Using a cotton swab is another option (or ear-cleaning cotton buds). If you choose this option, make sure the buds aren’t fluffy to avoid getting cotton caught in the earphone jacks. Just make sure that it fits perfectly, and then slowly spin it to clean both sides. Once you’re certain that everything fits perfectly, you can remove your headphones. The dirt will fall out after you remove the jack.

Some people swear by using a cotton swab dipped in alcohol. If you do this, make sure you squeeze out all of the excess liquid so it doesn’t get soggy. The earphone jack, however, is constructed of metal and can corrode if exposed to alcohol. As a result, you should only use this option if it is absolutely necessary. You can plug in your earbuds and try it out after a few minutes.

Reboot The Computer

Your device’s audio functions may be harmed by some updates. In the course of browsing or operating your phone, you may potentially make a mistake and change settings. Restart the device before moving forward. This will be accomplished by:

  • On the side of your Android phone, press and hold the Power button.
  • Press the restart button and wait a few minutes for the phone to shut down and restart.

Verify The Audio Settings On Your Device

  • If the mono option is enabled, it’s possible that your device’s audio settings are to blame for the problem. To fix this, go to your audio settings and disable the feature.
  • Plug in your earbuds and turn on the music.
  • On both sides, press the volume buttons (either to increase or decrease the volume). On the side of your screen, you should see a volume bar. More options can be found by tapping the 3 vertical dots at the bottom of the bar.
  • Choose Levels > Balance from the drop-down menu.
  • Listen to the music and adjust the balance until both sides of your headset have the same voice levels.
  • If this does not resolve the issue, the earphone wires may have been damaged in some way.

Examine Any Earphone Wires That Have Been Damaged

A wire inside your earbuds could be cracked or broken if they only work on one side. You need to know what caused the problem before you ask how to fix earphone wires.

Instead of gently withdrawing the connection from the plastic base, some phone users rip their earphones out by the cord. Damaged or disconnected wires, as well as a bent earphone plug, may result over time as a result of this.

Anywhere along the rope or around the plastic base could be a damaged wire. If the damage is to the cord and you can pinpoint the exact location, you can use the tape method described previously to repair it.

When you hold down the plug or apply temporary pressure to the damaged area surrounding the plastic base, the music will start playing in both earbuds. Because the process is a little difficult, you’ll need to see a technician to correct it.

Why Is Only One Side Of My Earbuds Working?

Depending on the audio settings on your headset, it might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

Why Do Earphones Suddenly Stop Working?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.


That’s all about How To Fix Earbuds That Work On One Side? With so many companies offering a variety of options, Bluetooth earbuds are fast becoming the norm. Regardless of the type of earbuds you have, technological problems can arise. The answers in this article will almost certainly solve your problem of only one side operating.

Often, it’s just a configuration issue rather than a hardware problem. You can still save the earbuds if the problem is a faulty cable or circuit. Repairing the ones you have instead of tossing them away and getting a new pair is much more environmentally friendly and cost-effective.

Frequently Asked Questions

Why do I just have one pair of earbuds that work?

Depending on your audio settings, headsets may only sound in one ear. Make sure the mono option is switched off in your audio properties. Also, check that the voice volumes on both earphones are equal. Both sides of your headset’s voice volumes must be equivalent.

What’s wrong with my left earphone?

If your left earphone stops working, the first thing you should do is check the cable. Insert the earphone connector into your smartphone and bend the cable with your fingers several times to discover a likely cable break spot.

How can deaf earphones be repaired?

With a soldering iron and some solder, you can generally repair this. In a comfortable working environment, gather your soldering iron, flathead screwdriver, disordering braid, and solder. Remove any extra solder from the iron using a moist sponge.

Is it a terrible idea to only have one earbud on at a time?

Even if you’re only using one earbud, it’s not a good idea to raise the volume up past 60%. Because each ear has its hearing system, you might still harm your hearing. You’re simply giving both ears equal “damage time” if the sound is greater than 60% of the maximum volume.

Similar Posts