How To Enable USB Keyboard On Boot? Step By Step Guide

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Enable USB Keyboard On Boot? Step By Step Guide and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

Here is a detailed article about How To Enable USB Keyboard On Boot? The system board’s fundamental input/output system, which would be a multi-purpose, saved, read-only memory device, can activate & disable internal and peripheral components. The USB controller may be disabled if the serial communication ports aren’t working.

The ports will function again after turning on the USB in the BIOS. You can also adjust the BIOS to Allow The Usage Of USB in os systems that lacked built-in plug-and-play compatibility if your company utilizes an older operative system to access outdated devices or software.

How To Enable USB Keyboard On Boot?

The steps to enable USB Support are as follows:

  • Access BIOS: Go to BIOS after your computer restarts.
  • Open integrated peripherals in a new window: Look for the choice of default peripherals or integrated peripherals.
  • Enable legacy USB compatibility by selecting the USB keyboard support option after you’ve located it.
  • Save your changes, then leave.
Enable USB Keyboard On Boot

What Is The Purpose Of The Boot Menu?

When we talk about just the boot menu, we’re referring to a menu that appears when the computer initially boots up. You can boot from a CD, DVD, flash drive, or hard disc, as well as a LAN, via the boot menu. You can select the gadget you want to utilize from the boot menu.

It will also make it possible for you to install a new os on a computer, which will be advantageous. Even if you’re using your Computer as an operating system, you can use the boot menu to quickly boot another operating system or program.

How Do I Get Into The Boot Menu?

It is critical to emphasize that the keypad is required to access the boot menu. You can simply access the boot menu when your pc is starting up by tapping various keys just on top of the keypad. There are a variety of keys that can be used to access the boot menu, but the most common ones are Esc, F2, F10, and F12.

These keys differ based on the computer or Laptop motherboard manufacturer. When the PC startup screen shows, hit the unique key appropriate for your motherboard to open the boot menu. Finally, I hope you understand what a boot menu is and how to reach it. After reading the information below, you will have a better understanding of what to do if your USB Keypad does not work before boot.

How Do I Boot With An USB Keyboard?

There are two methods for connecting your keyboard to your computer. The PS2 connector is used to attach the keyboard to the PC, and the USB Cable Is Used To Link The Keyboard to the PC. First and foremost, when it refers to the PS2 connection, it is a headphone jack on your motherboard with multiple pins protruding from it. This connector comes in a circular shape and has been in use for decades.

It is, on the other hand, simpler to attach the keyboard to your PC via the USB connector. Please remember that the USB ports are finicky and may not be reliable for you. As a result, there are two ways to allow the USB keypad on the boot.

What Are The Three Types Of Keyboards?

This is explained in depth here.

Use An USB Keyboard To Troubleshoot A Keyboard

If you use a Keyboard With A USB Port, you will have a significant advantage. Although it offers numerous benefits, the reality is that it is less dependable than the original PS2 from the 1980s. When you use the USB keypad, it suddenly stops working and then starts working again.

Even if you’re using a USB keypad, you can use the previous troubleshooting approaches on it without hesitation. Start your computer with the USB keypad attached and check whether the lights are inside or outside. Make sure your computer’s BIOS is adjusted to prevent keyboard failures as well.

If the keypad does not work, unplug it and connect the USB mouse to the same port as the USB keypad. If the lights on your mouse turn on, there is a problem with your keyboard. If, on the other hand, the mouse’s light does not come on and the mice do not work, the USB port is damaged.

You’ll find many USB ports on the top of the PC; if the USB keypad isn’t working at the boot menu; try changing the ports’ connections. If you use this approach, there’s a good possibility your keyboard will work in the boot menu again. Even if your keyboard is still not working, you should try the methods listed below.

PS2 Connector

If your USB keyboard isn’t working after connecting it to all of the USB ports, you’ll need to purchase a PS2 connector. The PS2 connector works well with both the mouse and keyboard and can also be used as a USB connector, and it is reasonably priced.

It’s an unusual occurrence when your keypad & USB port stop operating at the same time. If you’re using a wireless keyboard, this problem could be caused by the wireless range, thus it’s critical to understand how far wireless keyboards and mice can work.

USB Keyboard Not Working On Boot

There are several reasons why your keyboard could not be functioning at the startup menu. Some of them include USB ports that have not been started, keyboard drivers that BIOS has not supported, and USB ports that malfunction.

How To Turn On PC With A USB Keyboard?

Find the appropriate location. Most likely, the setting may be found under the “Power Management” section. Search for a setting with the name “Power On By Keyboard” or a variation. Switch off the computer, then try testing your settings.

Can A USB Keyboard Be Used With A Laptop?

Simply insert it into one of the available USB ports or the keyboard port on your laptop. As soon as the keyboard is connected in, you may start using it. Keep in mind that a laptop’s native keyboard frequently remains functional after installing an external one. Both may be utilized!


As a result, I hope your concerned regarding How To Enable USB Keyboard On Boot? Has been alleviated. This will be completed by employing all of the strategies outlined above. After you’ve finished working, you may easily enter the setup dialogue box and utilize it for a variety of functions. Even if you’re using a USB Keypad Or A PS2 Keyboard, you may simply solve any problem.

Frequently Asked Questions

Are USB keyboards compatible with BIOS?

In the BIOS, all-new processors now support USB keyboards natively. Since the USB legacy feature isn’t turned on by default on some of the older ones, they didn’t work.

Why won’t my keyboard operate in the boot menu?

Restart your computer. Go to the BIOS menu. This step may alter depending on the BIOS version. In my situation, the motherboard was a Gigabyte: From the main BIOS menu, go to Interface of Integrated Devices and look for the USB Keyboard Compatibility option. Set it to Enabled.

How can I enter BIOS mode on my keyboard?

Getting into BIOS mode:
Press and hold the Windows lock and F1 keys at the same time.
Take a 5-second break.
Press and hold both the Windows lock key as well as the F1 key at the same time.

What can I do if there isn’t a keyboard detected?

Select Settings from the Windows logo in your taskbar. Using the unified search in the Settings app, look for Fix keyboard, then select Find and fix keyboard problems. To begin the troubleshooter, click the Next button. Windows should discover problems, as you can see.

Similar Posts