How To Connect Two Routers Wirelessly To Extend Range?

In this blog, we’ll show you How To Connect Two Routers Wirelessly To Extend Range? In this day and age, where digital technology is at its pinnacle, connecting two Wi-Fi routers wirelessly without the use of a cable is simple.

Although most home computer networks only have one Wi-Fi router, there are a few scenarios where adding a second WiFi router makes sense. A wired network can be upgraded to support wireless devices using the Second WiFi Router.

How To Connect Two Routers Wirelessly To Extend Range?

Set the IP address of router 1 as the Internet Gateway of router 2. Any port 1-4 from router 1 to router 2 can be used to establish a cable connection between the two routers. You can set up a wired connection with a Wireless Media Bridge or a Powerline Ethernet Kit.

To Increase Range, Wirelessly Connect Two Wi-Fi Routers

Because of its chaotic appearance, it can be difficult to lay the physical cable from one room to another. You won’t be happy with the situation until it’s no longer underground. If you want to connect two Wi-Fi Routers together to boost your Wi-Fi signal or range, you can do so.

All you have to do is use an Ethernet network or Bridge mode to connect two Wi-Fi routers wirelessly. This approach is particularly beneficial for long-distance connections where actual cables are impractical owing to length and feasibility issues.

You can enhance both the range and the maximum number of connections that your Internet can handle by wirelessly Linking Your Two WiFi Routers. To accomplish the same, Ethernet is the easiest and most reliable way to connect two routers, though you may be able to connect your secondary router to the primary router. primary network via a wireless router.

Use The Prompt Use Of An Ethernet Network To Begin The Process

Make sure you identify the primary Wi-Fi router. This is the Wi-Fi router, which is either connected to a dedicated modem or a wall outlet.

Note: If you have two routers that are identical, you can use any of them as the primary router.

It’s now time to choose a Secondary WiFi Router. Your current network will be connected using this router. If you’re setting up a LAN-to-WAN network, the secondary Wi-Fi router will be in charge of the secondary network. Place both routers close to your PC or laptop in the next step. This step is required so that you may simply access both routers. After that, you can connect both routers with an Ethernet wire (LAN-to-LAN or LAN-to-WAN Connection).

Note: You can extend your Wi-Fi range to include the second router by using the LAN-to-LAN connection. A LAN-to-WAN link, on the other hand, creates a second network within the primary network, allowing you to restrict access to any PCs, Smartphone devices, or other devices connected to it. Start by configuring your Wi-Fi router for the first time. Link your main router to your modem with an Ethernet cable, then connect your main router to your modem with another Ethernet connection, and then connect your computer device to the router with another Ethernet wire.

If you’re a Mac user, you can solve the problem by purchasing an Ethernet to USB-C adaptor, often known as “Thunderbolt 3.” If your computer doesn’t have Ethernet ports, you can purchase an Ethernet to USB adaptor for Windows. Using the router’s manual or online documentation, configure your primary Wi-Fi router with the necessary settings.

Change The DHCP Settings After That; To Do So, Take These Steps

• Set the primary router’s IP between 1.2 and 192.168.1.50 on the router’s page.
• If you’re setting up a LAN-to-LAN network, you can leave the DHCP settings alone.
• Now, disconnect the first router and connect the second. Follow these instructions to configure the second router:
• Change the IP address to match the first router on the router’s page, then raise the second-to-last digit by one (e.g. 192.168.1.1 becomes 192.168.2.1).
• Change the WAN IP address to 192.168.1.51 if you’re creating a LAN-to-WAN network.
• Now, select “Subnet mask” and, if applicable, disable UPnP on the second router.
• Then, on the secondary router, establish the DHCP server and modify the wireless channel so that the signals don’t conflict with each other.
• Place both routers in the same location and connect them using an Ethernet connection.
• Finally, link the routers together. To complete the process, plug one end of the Ethernet cable into any LAN port on the primary router, then the other end into the LAN port on the back of the second router.

Make Use Of The Wireless Network

To begin, double-check that your equipment is compatible, as most wireless routers can also function as wireless access points. Place both of your Wi-Fi routers near your computer and follow the instructions to complete the first router setup (guided above).

Configure your router in the next step by entering the router’s IP address into a web browser. Consult the router’s manual or online documentation if you can’t find the router’s settings on your router’s page for the rest of this approach. Access the secondary router’s configuration page, then connect the secondary router to your computer via an Ethernet cable and open the configuration page. Once you’ve logged in, look for the “Internet” or “Wireless” configuration page.

• Enable the Bridge Mode in the following step. Follow these steps to complete the setup:
• You can choose between Bridge and Repeater Modes on the Wireless page.
• If you don’t see these menu options, it’s likely that your router doesn’t allow bridging.
• Specify the secondary router’s IP address within the primary router’s range once the above-mentioned steps have been completed.
• Now, give your secondary router a unique name and position it so that it receives at least 50% of the signal strength from the primary router.

How To Connect Two Routers To Extend The Range?

Change Router 2’s WAN IP address to the WAN IP of Router 1. Connect the two routers using an Ethernet cable running from ports 1–4 on Router 1 to ports 1–4 on Router 2. A wired link can be established using a Wireless Media Bridge or Powerline Ethernet Kit. In no circumstances should the WAN port of Router 2 be used.

Can I Use A Second Router To Extend The Wireless Range?

By configuring the new device as a wireless repeater, you can increase the WiFi range without a cable by using a different router, but at the expense of some speed. Rebroadcasting the signal from your primary router is the straightforward task of a wireless repeater.

How Do I Bridge Two Wireless Routers?

Change router 2’s Internet Gateway IP to router 1’s. Connect ports 1-4 of router 1 to ports 1-4 of router 2. Create a wired connection with a Wireless Media Bridge or Powerline Ethernet Kit. NO WAN on router 2.

Conclusion

Following these above How To Connect Two Routers Wirelessly To Extend Range? Tried-and-true techniques, you can easily connect two Wi-Fi routers without the use of a cable.

Frequently Asked Questions