How To Connect Laptop To Sharp Aquos TV Wirelessly? Process

Post Disclaimer

We independently review everything we recommend. The information is provided by How To Connect Laptop To Sharp Aquos TV Wirelessly? Process and while we endeavour to keep the information up to date and correct, we may earn a commission if you buy something through links on our post. Learn more

A cable can be used to Connect Your Sharp TV To A Laptop, allowing the display on your laptop monitor to be transferred to the TV screen. VGA or DVI connectors will be available on computers. LCD televisions with super-sharp displays have both VGA and HDMI inputs for hooking up to a computer. The larger screen of the television will aid work and leisure once the two are connected. Learn How To Connect Laptop To Sharp Aquos TV Wirelessly?

How To Connect Laptop To Sharp Aquos TV Wirelessly?

The video cable should have one end connected to the PC’s DVI, HDMI, or VGA video-out port and the other connected to the Sharp LCD TV’s corresponding input port. Keep track of the TV’s DVI or HDMI port name when connecting to a computer.

Connect Laptop To Sharp Aquos TV Wirelessly

There are a few conditions that must be completed before you may start casting.

  1. In order to effectively cast your computer screen to your TV, your television must have a Smart TV with Wi-Fi capabilities switched on. Your computer and smart TV both need to be on the same Wi-Fi network. (The only exception is when you’re using an HDMI connection to project your desktop, which we’ll discuss later.)
  2. You need to have Bluetooth enabled on both your smart TV and computer.
  3. Verify that both your smart TV and your computer are Miracast compatible. You may check this using the Connect app, which can be found on your Windows 10 computer under the Start menu.
  4. Ensure that your televisions and computer drivers are up to date.
  5. Make sure your TV isn’t an Apple TV — the way you cast on an Apple TV differs from how you cast on other smart TVs, so these instructions won’t work for you. You can begin casting once you’ve completed all of the requirements.

Steps For How To Connect Laptop To Sharp Aquos TV Wirelessly?

Step 1

Before plugging any wires into your computer or TV, make sure they’re both turned off.

Step 2

On your laptop, determine the type of connection. Either a VGA or a DVI connection will be available. VGA ports are rectangular and have 15 pins. A DVI connector is larger, with 24 pins and four additional holes adjacent to the main connection. You can utilize a VGA cable with a VGA connection; the television also has a VGA connector. If you have a DVI connection, you can use a DVI to VGA or DVI to HDMI cable to connect.

Step 3

Depending on the connection on your laptop, plug one end of your cable into it. Connect the other end of the cable to your TV’s VGA port. Plug the HDMI end of the cable into the HDMI port on the back of your TV if you’re using the DVI to HDMI port

Step 4

Both the TV and the laptop should be turned on. To access the Start menu, click the “Start” button in the bottom-left corner of the desktop. The screen resolution can be adjusted under the Personalization section of the Control Panel by following these steps: click “Control Panel,” “Appearance and Personalization,” and then “Adjust screen resolution.”

Step 5

Click the drop-down menu next to “Resolution” on the screen labeled “2.” Set the slider to your TV’s screen resolution. To determine the resolution of your screen, you may need to consult the owner’s manual for your television.

Step 6

To change how the desktop appears on your TV and laptop, go to the menu next to “Multiple Displays.” To close the window, click “OK” after clicking the “Apply” button at the bottom of the window.

Other Options For Connecting Your Computer To Your Television

If everything else fails, an HDMI cable, a third-party Miracast adaptor, or a Google Chromecast device can still be used to cast your Windows desktop to your TV. Unlike previous ways, the HDMI cable and Chromecast plug-in do not necessitate a smart TV.

Can I Connect My Laptop To My TV Wirelessly?

Suppose your personal computer or laptop runs the Microsoft® Windows® 10 operating system. In that case, you can extend or display your computer screen on a TV that supports MiracastTM technology using the wireless Screen mirroring feature.


By the time you finish reading the instructions for How To Connect Laptop To Sharp Aquos TV Wirelessly? You can connect your laptop to sharp tv wirelessly.

Frequently Asked Questions

How can I establish a wifi connection between my laptop and my Sharp Smart TV?

Go through the settings on your Android device (phone/tablet), then look for and pick the Cast option, which will be under “Bluetooth & Connections” (it may vary in different brands of Android devices). Select Wireless Display from the three-dot menu once you’ve entered the Cast option.

Why isn’t my laptop wirelessly connecting to my TV?

Check to see that the display supports Miracast and that it is switched on. You’ll need a Miracast adaptor (also known as a dongle) that plugs into an HDMI port if your wireless display doesn’t support it. Ensure that your wireless display, adapter, or dock’s device drivers are current and that the latest firmware is installed.

Why My computer won’t connect to my TV for some reason?

Select a lower screen resolution on the computer, and then verify that the image is properly output. Connect to another HDMI port on the TV and verify that the image is properly displayed. If changing the HDMI cable resolves the issue, the original HDMI cable may be defective.

Why isn’t my laptop’s HDMI port compatible with my television?

One of the reasons why HDMI from your laptop to TV doesn’t function is that your laptop’s display settings are incorrect. As a result, checking your laptop’s display settings is always a smart idea: Press the Windows logo key and P on your keyboard at the same time to check your computer’s display settings.

Similar Posts