How Do I Connect My Wifi Extender To My Router Without WPS?

Here is detailed information about How Do I Connect My Wifi Extender To My Router Without WPS? There are numerous methods for connecting a WiFi extender to a router that does not require WEP or WPS. Finding the optimum location for your Wi-Fi extender should be your priority.

How Do I Connect My Wifi Extender To My Router Without WPS?

Make sure it’s close enough to your router to receive a good signal, but not too close that it interferes with it. You can use an Ethernet cable instead of Wi-Fi to link the two devices.

One end of your Ethernet cable should be connected to your WiFi extender and the other end to one of your router’s Ethernet ports. You can utilize anyone as long as you have a modern router with multiple Ethernet ports. If this is the case, all but one of the available ports should be left unused for now.

What Exactly Is the WPS Method?

WPS (Wi-Fi Protected Setup) is a function that allows you to connect devices to your network quickly. That being said, there are reports that this feature may leave your network open to attack. Because of this, we recommend disabling WPS on your router and connecting your devices via a WiFi extender.

Router-Extender Connection Via Ethernet Cable, Not WPS

The web-based page is the most time-efficient means of configuring your range extender. To access the online management page, you must connect your range extender to an Ethernet network. Each range extender kit comes with an Ethernet cable.

The range extender must be turned on before you begin this procedure. A power source is also required. Connect the Ethernet wire from the power supply unit of the range extender to the Ethernet port on your laptop or desktop PC after it has been powered on.

Even if you have a laptop or desktop computer that doesn’t support wireless networking, you can still utilize your range extender. It’s good to remove the end of a wire that connects your router with your computer. Finally, connect it to the range extender, and you’re done. The range extender and PC will be able to connect over Ethernet due to this.

Use Wireless Connection To Join Extender To Router Instead Of WPS

Installing the range extender over a wireless network without WPS is also feasible. Your network extender device should be connected to the default TP-Link or another network extension device. On any wireless device, this can be done by accessing the wireless connection list (laptop, tablet, or smartphone).

If The Extender Asks For A Password, Look For It On The Extender’s Box Or The Back Of The Device

Now, open a web browser of your choice on your computer and begin exploring the World Wide Web (Internet Explorer [Microsoft Edge on Windows 10], Google Chrome, Mozilla Firefox, Apple Safari). Then, depending on the browser you’re using, in the location or URL bar at the top of the browser, input your extender’s default IP address (frequently 192.168.0.1 or situated on the box or reverse of the extender).

Installation Guide For Connecting A WPS-Less Extender To A Native Router

You’ll see a login box in your browser if you’ve successfully logged in. The login credentials are admin. The range extender will display a window once you’ve successfully logged in to the device. Now, follow the following instructions:

• After successfully logging in, a web management page will open.
• Choose your location and hit it off the next button.
• Check or choose your wireless network here.
• Type in the password for your wireless set of connections
• Copy from Main Router/AP is an option that will force the range extender to broadcast a name that is identical to the one you now use. Take a look at the drop-down menu and select Customize. You can set the wireless identity that the range extender will transmit on your network using this method. We recommend that you keep the Copy from the Main Router/AP option checked. Click next when you’re done.
• Complete the form by checking your choices and clicking FINISH after you are certain that all of the information is correct.
• It will reboot after you press FINISH to implement your updated setup. Awaiting completion of this procedure may take as long as two minutes. The LEDs on the range extender’s front should show the following information after it has finished restarting.

Your router and wifi extender are now connected without using a WPS button. However, your extender & router settings may differ from the above procedure. Scientific help is always accessible to help you.

Can You Use A Wi-Fi Extender Without WPS?

If your hub/router lacks a WPS button, you can still set up your extender using a web browser and the web-based setup. Necessary: Be sure your computer is not connected to the internet before implementing these instructions (unplug its ethernet cable or disconnect from your wi-fi network).

How Do I Connect My Netgear WiFi Extender Without WPS?

• Connect the wireless extension to the wall outlet. Your smart device’s web browser should be opened. Visit the web interface at mywifiext.net.
• Enter the username and password after the login box has appeared.
• Click the Login button after that.
• Finally, click the Finish button to finish the installation of your new extender.

Conclusion

Let’s conclude all about How Do I Connect My Wifi Extender To My Router Without WPS? Your Wi-Fi extender and router should be connected without WPS, as WPS is occasionally insecure. Follow the instructions above and attach your extender to the router to keep your network safe.

Frequently Asked Questions